New Server Build - Part 2
So with all the equipment here, I began the server build. Refresh your memory for components by reading New Server Build – Part 1.
The Old Machine
Before beginning this build I booted the old machine; it was running FreeBSD previously. It had an Athlon 1800+XP CPU, 2GB DDR RAM and AGP graphics. It also had an S3-Virge PCI video card AND an SMC 1000base-tx GigE NIC. Both the NIC and video card were reused in the new server build.
The old machine also had (3) IDE devices – (1) DVD-RW and (2) WD 250GB disks. The motherboard only supports 1 IDE cable, so I’ve connected it to the DVD and 1 of the disks. At some point, I need to boot off USB or get/scrounge a SATA boot disk. I do have a spare 3.5" 1GB SATA, but that is used for weekly off site backups currently. I’ll probably try using a 2GB SDHC flash drive for boot since the host OS only runs the hypervisor.
